Design, installation, commissioning and ongoing servicing for homes and businesses across Peterborough. Built to protect lives.
From Grade D domestic interlinked alarms to fully addressable Grade A commercial panels, we design every installation to BS 5839 — the right system for your occupancy, risk profile and budget.
Every detector carries a unique address. The panel shows the precise device and location of any alarm or fault — critical for multi-storey offices, schools, warehouses and care homes where speed of identification saves lives.
Zone-based detection for smaller commercial premises. All devices on a circuit report to a zone indicator. Cost-effective, fully compliant and reliable for offices, shops and small businesses where zone-level identification is sufficient.
Interlinked mains-powered smoke, heat and CO alarms for houses, flats and HMOs. Designed to BS 5839 Part 6 — mandatory for new builds under Building Regulations and a standard Peterborough City Council HMO licensing condition.
Where cable routes are impractical — listed buildings, occupied offices, heritage properties. Encrypted RF devices communicate wirelessly to the panel. Hybrid systems blend wired and wireless zones. Zero structural disruption during installation.
We don't start cabling until the design is approved and the price is fixed. No rework. No surprises. First-time commission, every time.
An engineer visits to assess building size, layout, occupancy, fire risk and cable routes. Panel location, detector positions and any specialist requirements are identified and documented before a single quote is written.
A fully compliant design to BS 5839 Part 1 or Part 6 is produced — detector schedules, zone drawings, cable calculations, cause-and-effect matrix. Fixed-price quote issued before any work begins. No surprises.
Certified engineers install all cabling, detectors, call points, sounders, strobes and the control panel. Out-of-hours and phased installation available to minimise disruption to your business operations.
Every device triggered and verified at the panel. Every zone confirmed. Every output tested. Panel programmed, delays set, cause-and-effect confirmed. Nothing signed off until fully operational.
Commissioning certificate, as-built drawings, operating manual and log book issued. Staff training on site. Monitoring centre registration activated where applicable. 12-month workmanship warranty.
Commissioning is the formal legal verification that a fire alarm system operates as designed. It is a mandatory requirement of BS 5839 — and must be completed before the system goes live. Without a signed commissioning certificate, your system has no legal standing for insurance, fire risk assessment or police URN purposes.
We provide a signed commissioning certificate for every new installation and every significant modification. It is a legal document — keep it in your fire alarm log book and produce it when asked by your fire risk assessor, insurer or fire authority.
Book CommissioningEvery detector, call point, sounder and strobe individually triggered and confirmed at the panel. No sampling. Nothing skipped.
Every alarm condition verified to produce the correct outputs — door releases, ventilation shutdown, lift recall, suppression activation.
Signalling path to the Alarm Receiving Centre tested both ways. URN confirmed active with Cambridgeshire Police where applicable.
Battery standby capacity calculated and confirmed against the 72-hour BS 5839 requirement. All power outputs measured and signed off.
An unserviced fire alarm is a liability, not a safeguard. Regular maintenance prevents silent failures, eliminates nuisance alarms, keeps your insurance valid and satisfies your obligations under the Regulatory Reform (Fire Safety) Order 2005.
Mandatory minimum per BS 5839 Part 1 Clause 45. All devices, panel, batteries and signalling paths covered. Certificate issued same day.
Comprehensive visit covering all 6-monthly checks plus deeper system inspection. Essential for high-risk and high-occupancy buildings.
System fault at 3am? Our 24/7 fault line is staffed for contract customers. Typically on site within 4 hours, any day of the year.
Everything you need to know about fire alarm installation, servicing and compliance — without the jargon or the sales pitch.
Ask Us AnythingOur engineers visit your building, assess your fire detection requirements and produce a fully compliant design with a fixed-price quote. No obligation whatsoever.
Response within 4 business hours · No hard sell · No obligation